Overview of Training Courses

We have packed numerous important simulation options that are available at Simcenter into training courses. When it comes to the scope, we have mostly based ourselves on the respective license packages. Choosing the right training course is certainly not easy for you. So, just give us a call to discuss which training is right for you. The following is a structured list of the training courses we offer. If you select a link, the detailed description appears.

After selecting a link, the detailed training description follows below

Training

Good training puts you in a position to understand difficult relationships and to use simulation effectively. The trainer can become an important contact person who will continue to support you. We offer training, workshops and individual training courses for designers and engineers in all areas of SIEMENS Simcenter applications. At Dr. Binde Ingenieure GmbH you will find committed and qualified experts who will pass on specialist knowledge and experience from industrial, development and research projects to you in the training courses. Due to the many years of experience of our engineers, we have been able to continuously improve our training concept and are able to adapt the training courses efficiently and tailor-made to your requirements and wishes.

1.4 Dynamic Response with Simcenter Nastran Sol107-112

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

2 days

Description

This seminar deals with the Simcenter Dynamic Response solutions, which allow calculation engineers to analyze excited vibrations.

Continue Reading

1.7 Fatique Analysis with Simcenter Specialist Durability

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

2 days

Description

In this seminar, fatigue strength or service life analysis is trained with the Simcenter module "Specialist Durability.".

Continue Reading

2.2 Thermal Analysis with Simcenter Thermal

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

2 days

Description

With Simcenter Thermal / Flow or ESC, among other things, numerical temperature calculations can be carried out.

Continue Reading

3.2 EM Thermal Analysis with Simcenter NX-Magnetics

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

2 days

Description

This advanced course deals with the possibilities for temperature analysis with electromagnetic heat sources.

Continue Reading

4.1 Kinematics for Designers with Simcenter Motion

This email address is being protected from spambots. You need JavaScript enabled to view it.

Customervoice

Duration

2 days

Description

With the kinematic analysis of mechanisms (multi-body simulation / MBS), valuable information about the movement behavior of the system can be collected in the early development phase.

Continue Reading

4.4 Animation Designer

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

1 day

Description

It often makes sense to look at the designed assemblies of mechanical systems in a moving state and thus to collect information about motion sequences, positions, distances and collisions. A quick and easy process and close proximity to the construction are crucial.

Continue Reading

1.2 Advanced nonlinear Methods with Simcenter Nastran Sol601/701

This email address is being protected from spambots. You need JavaScript enabled to view it.

Customervoice

Duration

3 days

Description

This advanced seminar teaches how to use the NX module Advanced Nonlinear FE Analysis.

Continue Reading

1.5 Dynamic Response with Simcenter Nastran Sol103-Response

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

2 days

Description

This seminar deals with the Simcenter Response Dynamics module, which allows calculation engineers to analyze excited vibrations. The modal model of the system is used to solve the response simulation using the SOL 103 Response Dynamics.

Continue Reading

1.1 Basic Structural Simulation with Simcenter Nastran Sol101,103,105,106,153

This email address is being protected from spambots. You need JavaScript enabled to view it.

Customervoice

Duration

3-4 days

Description

For structure simulations in NX / Simcenter 3D, model preparation, model construction and result evaluation are carried out in the pre / post environment (formerly Advanced Simulation) and NX Nastran is used as a standard solver.

2.3 Coupled Thermal/Fluid Analysis with Simcenter Thermal/Flow/ESC

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

4 days

Description

With Simcenter Thermal / Flow or ESC (Electronic System Cooling) tasks of fluid mechanics, complex thermal problems as well as coupled thermal / fluid tasks can be solved.

Continue Reading

3.3 Analysis of Electric Machines with Simcenter NX-Magnetics

This email address is being protected from spambots. You need JavaScript enabled to view it.

Customervoice

Duration

3 days

Description

Based on the training "EM analysis" the analysis of electric motors with MAGNETICS for NX is discussed in this seminar.

Continue Reading

4.2 Multibody Dynamics with Simcenter Motion

This email address is being protected from spambots. You need JavaScript enabled to view it.

Customervoice

Duration

1 Tag

Description

For the design of a moving system, degrees of freedom and dynamic properties are often of great importance. With Simcenter Motion, the dynamic behavior of complex systems can be calculated and evaluated.

Continue Reading

5.1 FEM Component Analysis with Wizard

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

1 day

Description

The program module "Strength-Wizard" allows the mechanical analysis of individual components with regard to their static behavior under load.

Continue Reading

1.3 Advanced nonlinear Methods with Simcenter Nastran Sol401/402

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

3 Tage

Description

In this advanced seminar, the possibilities offered by the Simcenter solutions Sol 401 Multi-Step Nonlinear and Sol 402 Multi-Step Nonlinear Kinematics are trained.

Continue Reading

1.6 Analysis of Laminates with Simcenter Nastran

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

1 day

Description

Fiber composite materials offer very high strength despite their low weight. For this reason, the number of applications is growing steadily. The costs of prototype construction and the number of tests can be kept low if the components and assemblies are analyzed with Simcenter 3D.

Continue Reading

2.1 Computational Fluid Dynamics (CFD) with Simcenter Flow

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

2 days

Description

With Simcenter Flow, among other things, numerical flow calculations (Computational Fluid Dynamics - CFD) can be carried out.

Continue Reading

3.1 Basic Electromagnetics (EM) Analysis with Simcenter NX-Magnetics

This email address is being protected from spambots. You need JavaScript enabled to view it.

Customervoice

Duration

2 days

Description

The MAGNETICS for Simcenter module, also known as NX-Magnetics, which is trained in this seminar, opens up possibilities for simulating complex electrodynamic models.

Continue Reading

3.4 High Frequency EM Analysis with Simcenter NX-Magnetics

This email address is being protected from spambots. You need JavaScript enabled to view it.

Customervoice

Duration

4 days

Description

This advanced seminar deals with applications of high-frequency analyzes with the solver MAGNETICS.

Continue Reading

4.3 Mechatronics Concept Designer

This email address is being protected from spambots. You need JavaScript enabled to view it.

Duration

2 days

Description

The Mechatronics Concept Designer (MCD) module allows the user to interactively simulate complex movements of electromechanical systems.

Continue Reading

  • 1
  • 2